Section¢ñ:PRODUCT IDENTIFICATION
Product Trade Name: MALTOL FCC
US DOT Hazard Class : N/A KEEP AWAY FROM CHILDREN
PH of Product: N/A
UN Number: N/A
Health: 1 Fire: 1 Reactivity: 0
Section ¢ò: HAZARDOUS INGREDIENTS
EXPOSURE LIMIT INFORMATION:
HAZARDOUS INGREDIENT(S): MALTOL
CAS NO.: 118-71-8
FEMA NO.: 2656
AMT. (%): 100
OSHA TWA: 0 N/A
OSHA STEL: 0 N/A
ACGIH TWA: 0 N/A
ACGIH STEL: 0 N/A
Section ¢ó: PHYSICAL DATA
PRODUCT NAME: MALTOL FCC
APPEARANCE/ODOR:White Powder or needle crystals/Burning sweet
SOLUBILITY IN WATER: MICRO-SOLUBLE
SPECIFIC GRAVITY: N/A
VAPOR PRESSURE: N/A
MELTING POINT: 164 @ 760.00mmHg
VAPOR DENSITY: N/A
BOILING POINT: 200.00 @ 760.00 mmHg
VOLATILE BY VOLUME: 100.00
EVAPORATION RATE: N/A
Section ¢ô: FIRE AND EXPLOSION HAZARD
UPPER FLAMMABLE LIMIT(% BY VOLUME): N/A
LOWER FLAMMABLE LIMIT(% BY VOLUME): N/A
EXTINGUISHING MEDIA: Carbon Dioxide; Dry Chemical; Unversal-Type Foam.
clothing should be worn when fighting fires
Involving essential oils or chemicals.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus
and protective clothing should be worn when fighting fires involving
essential oils or chemicals.
UNUSUAL FIRE AND EXPLOSION HAZARD: Keep away from Heat and open flams.
Section ¢õ:HEALTH HAZARD DATA
PRIMARY ROUTES OF EXPOSURE: SKIN CONTACT: Yes
INHALATION: No EYE CONTACT: Yes SKIN ABSORBTION:No
INGESTION: Yes
CARCINOGENICITY: OSHA: No IARC: No NTP: No ACGIH: No
EFFECTS OF OVEREXPOSURE: May be irritating to skin and eyes
EYE CONTACT EFFECTS: May be irritating to eyes
SKIN CONTACT EFFECTS: May be irritating to skin
INHALATION EFFECTS: May be irritating if inhaled
INGESTION EFFECTS: Harmful if swallowed
NOTE:
EMERGENCY AND FIRST AID PROCEDURES:
EYE CONTACT: Flush immediately with clean water for least 15 minutes.
Contact
A physician as nessary.
SKIN CONTACT: Remove any contaminated clothing or shoes. Wash affected
area
Thoughly with soap and water for at least 15 minutes. Contact a physician
as
nessary.
INHALATION: Remove from the exposure to fresh air. If breathing has
stopped,
Administer artificial respiration and oxygen if available. Contact a
physician as
nessary.
INGESTION: Wash out mouth with water and give water to dilute provided
person
Is conscious. Contact a physician or local poison control center immediately.
Section: ¢ö: REACTIVITY DATA
CHEMICAL STABLE: Yes
CONDITIONS TO AVOID: This product presents no significant reactivity
hazard
It is stable and will not react violently with water. Hazardous polymerization
will
not occur.
INCOMPATIBILITY WITH OTHER MATERIALS: Avoid contact or
Contamination with strong acids, alkalis, or oxidizaing agents.
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS:
Carbon monoxide and unidentified organic compounds may be formed
During combustion.
Section ¢÷: SPILL OR LEAK PROCEDURES
SPILL, LEAK AND WASTE DISPOSAL PROCEDURES: Eliminate all ignition
Sources. Ventilate area. Contain spill and recover free product. Absorb
remainder
on vermiculite or other suitable absorbent materials. Use of self-contained
breathing apparatus is recommended for any major chemical spills. Report
spill
to appropriate authorities if required.
WASTE DISPOSAL METHODS: Place material and absorbent into sealed
Containers dispose of in accordance with current applicable laws and
regulation.
NOTE: Empty containers can have residues, gases and mists and are
subject to
Proper waste disposal.
Section ¢ø: SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: None generally required. Use NIOSH approved
respirator in confined area or if material is rated toxic.
VENTILATION PROTECTION: Local exhaust meeting ACGIH criteria.
PROTECTIVE CLOTHING: Chemical resistant clothing is recommended.
PROTECTIVE GLOVES: Use chemical resistant gloves is recommended.
EYE PROTECTION: Use goggles or face shield is recommended.
OTHER PROTECTIVE EQUIPMENT: Avoid inhalation and contact with
Skin and eyes. Good prsonal hygiene practices should be used. Wash after
Any contact, before breaks and meals, and at the end of the work period.
Contaminated clothing and shoes should be cleaned before re-use.
Section ¢ù: SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDING AND STORGE: Place materials
And absorbent into sealed containers and dispose of in accordance with
current applicable laws and regulation
OTHER PRECAUTION: Good manufacturing practices dicate that an eyewash
fountain and /or safety shower should be available in the work area.
Section ¢ú: EMERGENCY PLANNING & COMMUNITY RIGHT-TO-
KNOW(SARA¢ó)
311/312 CATEGORIZATION(40CFR370)
FIRE: YES
SUDDEN RELEASE OF PRESSURE: NO
REACTIVITY: NO
IMMEDIATE(ACUTE): NO
DELAYED(CHRONIC): NO
312 CATEGORIZATION(40CFR370)
This proprietary mixture contains the following toxic chemical(s) above
de minimin concentrations subject to the requirements of Section 313
of Title ¢ó of the Superfund Amendment and Reauthorization Act of 1986:
See Section ¢ò.
Section ¢û: PREPARATION DATE OF MSDS
PREPARED BY: BMCL Occupational Health and Safety Department
DATE: 08/18/97
DISCLAIMER
The information contained on the Material Data Sheet has been compiled
from data considered accurate. This data is believed to be reliable,
however, it must be pointed out that values for certain properties are
known to vary from source to source. BIOESSENCE MANUFACTURING Co. Expressly
disclaims any warranty expressed or implied as well as any liability
for any injury or loss arising from the
use of this information or the materials described. This data is not
to be construed
as absolutely complete since additional data may be desirable when particular
conditions or circumstances exist. It is the responsibility of the user
to determine the best precautions necessary for safe handing and use
of this product for his application. This data relates only to the specific
materials designated and and not to be used in combination with any
other material. It is the purchaser's responsibility to familiarize
themselves with all applicable regulations.
<<<back next>>>